Priyavrat.Thareja

Blog » Pages, Quality, Technical, Foundry, Education, Engineering, Publications, Environment » Manufacturing Paradigms In 2010, professed in 2003

Manufacturing Paradigms In 2010, professed in 2003.Pages

Manufacturing Paradigms In 2010, professed in 2003.
When shall we reach these (projeced) levels? Actually term as Futuristic

To read the erstwhile one… go to ssrn.com/abstract=2190326 at hq[dot]ssrn [dot]com

The questions are:
How much Flexible?
How intelligent?
How much Responsive and fast
How accurate
Cheaper?
——-More downloadable papers authored by me: ;;;;;;;;;;;>

Thareja, Priyavrat and Thareja, Mannu, (2012). Aligning the People in Nation Building ,Journal of Management and Technology, Vol. 6, Issue 1, pp. 163-173, Jan- Jun 2012. Available at SSRN:

Thareja, Priyavrat, (2014), Working Smarter, Not Harder Working Smarter, Not Harder”, Quality World, Vol XI, issue4, April, 2014, pp 13-17. Available at SSRNhttp://dx.doi.org/10.2139/ssrn.2458911

Thareja, Priyavrat, (2008)Each One is Capable (A Total Quality Organisation Thru’ People) . FOUNDRY, Journal For Progressive Metal Casters, Vol. 20, No. 4, July/Aug, 2008. Available at SSRN

find more links

Thareja, Priyavrat and Thareja, Mannu, (2010)The DMAIC of Human Values. Quality World, Vol. 7, No. 7, July 2010. Available at SSRN

Thareja, Priyavrat, (2008) Competitiveness Through Defect Mitigation Professed in a Low Pressure Die Casting FacilityJournal of Education in Engineering and Technology, Vol. 2, No. 1, pp. 1-7, Jan-June 2008. Available at SSRN:

Thareja, Priyavrat and Mahapatra, P. B. and Sharma, D. D., (2010), Metamorphosis in Teaching of ‘Materials’: A Case Study Aligning Manufacturing Requirements . Proceedings of National Conference on Advances in Materials and Manufacturing Technology, 2010. Available at SSRN: or http://dx.doi.org/10.2139/ssrn.1567511

Thareja, Priyavrat, (2012), Competitive Foundry Through Integration of TIPS . Indian Foundry Journal, Vol 58, No. 1, p. 37, January 2012. Available at SSRN:

Thareja, Priyavrat and Thareja, Mannu, (2013) Committing to Green, Brushing by Green Standardization . Journal of Energy, Environment & Carbon Credits, vol 3, No 3, pp 1-14, ISSN: 2249–8621. Available at SSRN:

Consulting the Management for Man2Metamorphosis Page 9 of 27 9 abstract reproduced below.

Thareja, Priyavrat, Cast’ing People in Continuous Quality Improvement (October 16, 2011). OmniScience: A Multi-disciplinary Journal, Vol. 1, No. 2, pp. 1-20, October 2011. Available at SSRN: http://ssrn.com/abstract=1944698

The 14 Principles Guru Gobind Singh Cultivated to Societal Stability

Classrooms of 2020

Comparative Analysis of PowerPoint and Blackboard Teaching Methodologies

Thareja, Priyavrat, (2008). Total Quality Organization Thro’ People (Part 18): 8-D Ate Thy Problems ,FOUNDRY, An Indian Journal For Progressive Metal Casters, Vol XX, No 6, Available at SSRN or http://dx.doi.org/10.2139/ssrn.2050365
;;;;;;;;;;;;;;;;;;;;;;;;;

Thareja, P. (2013). Exploring Qualte-k-nology for a Breakthrough Tomorrow (Quality of, say, Particulate Technology Knowledge). OmniScience: A Multi-disciplinary Journal, 3(2), 12-26

Thareja, P. (2014). Hollow Bricks-Assisted Sustainable Housing Construction. Journal of Advanced Research in Construction and Architectural Engineering, 1(1), 1-16.

- Posted on July 20th, 2014 in Pages, Quality, Technical, Foundry, Education, Engineering, Publications, Environment | 7,504 Views |

2 Comments »

2 Responses to “Manufacturing Paradigms In 2010, professed in 2003”


1. Posted byPriyavrat Thareja on September 6th, 2015 at 7:57 am

Advantage of Cad/Cam Technology

Sukhmeet Singh
Technical Support Engineer
Faculty of Design and Innovation
GNA University, Phagwara

Computer-aided design (CAD) is the use of computer
systems to assist in the creation, modification, analysis,
or optimization of a design whereas Computer-aided
manufacturing (CAM) is the use of computer software
to control machine tools and related machinery in the
manufacturing of workpieces.
While CAD softwares are used to increase the productivity
of the designer, improve the quality of design, improve
communications through documentation, and to create a
database for manufacturing, the primary purpose of CAM
is to create a faster production process and components
and tooling with more precise dimensions and material
consistency, which in some cases, uses only the required
amount of raw material (thus minimizing waste), while
simultaneously reducing energy consumption.
CAD/CAM has become an important technology within
the scope of computer-aided technologies, with benefits
such as lower product development costs and a greatly
shortened design cycle. CAD/CAM enables designers
to layout and develop work on screen, save it for future
editing and thus saving time on their projects. Because
of its enormous economic importance, CAD has been a
major driving force for research in computational geometry,
computer graphics (both hardware and software), and
discrete differential geometry.
CAM may also refer to the use of a computer to assist in
all operations of a manufacturing plant, including planning,
management, transportation and storage. CAD/CAM output
is often in the form of electronic files for print, machining,
or other manufacturing operations. CAM is a subsequent
computer-aided process after computer-aided design (CAD)
and sometimes computer-aided engineering (CAE), as the
model generated in CAD and verified in CAE can be input
into CAM software, which then controls the machine tool.
Thus CAD/CAM is an important industrial art extensively
used in many applications, including automotive,
shipbuilding, aerospace industries, industrial and
architectural design, prosthetics, and many more.



2. Posted byPriyavrat Thareja on November 6th, 2020 at 12:05 am

Thank you, Sukhmeet. Nice reflexion of your experiences

thareja



RSS feed for comments on this post. TrackBack URI


Leave a comment

You must be logged in to post a comment.